Tel：400-900-9069

Product Specifications

Product Features:

1. The light source adopts the internationally renowned brand Osram lamp beads, with stable quality, good color consistency and small light decay

2. Imported lens, unique optical design, long lighting distance and even shooting

3. The thinnest up to 6CM thick double-sided light box, uniform lighting

4. The maximum distance of 5 meters can be played against each other, which greatly saves the cost of light source and installation

5. Adopt IC switch constant current circuit design, DC24V input, high stability

6. 2.0 high-conductivity aluminum substrate, fast heat dissipation, small lamp bead fading

7. Can be used with different lengths such as DLW446

It is widely used in single and double-sided advertising signs or advertising light boxes with a thickness of 12-35CM, and is also suitable for local lighting in places.

Product parameters:

Additional parameters:

②The above data are typical values, and the actual parameters of the product may be different from the typical data.

Dimensions (unit: mm):

DLW445E

DLW446E

Connection diagram

DLW445E

DLW446E

Light distribution curve:

Installation Instructions:

1. Use 2x1.5mm2 or more cables for the main power line. If the power cord of the straight light needs to be lengthened, you must choose a wire with a specification of 0.75mm2/18# or above, so as to avoid overloading the power cord and cause excessive heat and cause adverse consequences. The length of the power cord between the lamps should not exceed 3 meters, otherwise the line loss will increase and the total power will increase;

2. Please use the wiring scheme in the connection diagram;

3. When installing the straight light, screw the screw into the hole of the fixing frame and lock it;

4. When the wire conductor is exposed at the tail end of the straight light, first use the diagonal pliers to strip the wire about 10mm, and screw it into the terminal for insulation protection;

5. In order to ensure waterproof and anti-corrosion, after the power cord is screwed into the terminal, it is recommended to inject one-component silica gel (or neutral glass glue, or waterproof grease) into the terminal to cover the exposed copper wire of the power cord for protection;

6. Do not touch or work with electricity on this product;

7. It is recommended to use a switching power supply (with short-circuit protection, over-voltage protection, and over-current protection) that has passed the relevant safety certification.

Packaging instructions:

package instruction:

1. Packed in carton, carton size: 502*30*28mm

2. Outer box size: 457*337*320mm

3. 10PCS/layer, 10 layers per box, total 100PCS

4. Net weight (NW) 6.5(1±10%)kg

5. Gross weight (GW): 8.7(1±10%)kg

Remarks: The above packaging quantity and weight are only for the packaging method shown in the figure. When other packaging methods are used, the packaging quantity and weight will be different, and the actual product shall prevail.

Installation method or installation diagram

Installation diagram description

The test panel is a 3mm thick acrylic whiteboard with a light transmittance of about 54.4%

The metal cube model was selected for the experiment

Evenly arranged according to product photoelectric performance parameters

Project case